Vibration Feeder (Feeder) Exciter Introduction:

The exciter adopts two eccentric shafts of specific positions to be meshed with gears, and the two eccentric shafts are driven to rotate under the driving of the motor, thereby generating a huge synthetic linear exciting force, so that the body performs forced vibration on the supporting spring. The material is powered by this vibration, and the sliding and throwing motions on the trough are continuously moved to achieve the feeding purpose. When the material passes through the screen strip on the tank body, the smaller material falls from the gap between the screen strips, so that it does not need to undergo any crushing process to achieve the effect of screening.

Feeder shaker product performance characteristics:

1. The fuselage adopts a closed structure, which uses the eccentric block in the vibrator to generate centrifugal force, so that the movable part such as the sieve box and the vibrator can be forced to continue circular or nearly circular motion, which can prevent dust pollution.

2. Smooth vibration, reliable operation and long service life; the excitation force can be adjusted, the flow can be changed and controlled at any time, the adjustment is convenient and stable; the motor is variable frequency speed regulation, the frequency can be adjusted, thereby changing the output and controlling the feeding amount, no need Start the motor frequently.

3. Using inertial vibration technology combined with the most advanced variable frequency speed control technology, the vibration motor mounted on the balance frame is connected to the feed tank through the main vibration spring. The excitation spring is used to restrain the balance frame and the feed trough during operation. The generated inertial force vibrates under resonance.

4. Low power consumption, high power factor and strong adaptability to materials. Different block and granular materials can be uniformly, regularly and continuously fed into the receiving device from the storage bin.

working principle:

The vibrating feeder uses the eccentric mass in the vibrator to generate centrifugal force, so that the moving part of the sieve box, the vibrator and the like are forced to be continuous circular or approximately circular motion. The vibrating feeder is composed of a feeding trough body, a vibration exciter, a spring bearing, a transmission device and the like. The vibration source of the tank vibration feeding is the vibration exciter. The vibration exciter is composed of two eccentric shafts (main and passive) and a gear pair. The motor drives the driving shaft through the V-belt, and the gear on the driving shaft meshes with the passive shaft. Rotating, the main and passive shafts rotate at the same time, so that the tank body vibrates, so that the material continuously flows to achieve the purpose of conveying materials.